Digital Delay, Inc., designed and manufactures the Digital Trim for use in drag boats.
The Digital Trim has two outputs. The outputs are controlled by two independent four stage timers. Typically one output is used to trim the motor while the second output controls a ram to lift the motor.
The timers can be started together or independently. Both timers also have to be armed before they will cycle; this keeps the timers from restarting if you have to let up on the throttle momentarily. The arming can be done by a remote switch or by pressing the enter key on the keypad.
Racing and Marine
1019 South Roane Street
Harriman, TN 37748